Solids Control Equipment

What is a jet mixing funnel ? The jet mixing funnel is basically the same in structure or principle as the cement mixing funnel used for cementing. It is mainly composed of a nozzle, a mixing chamber, a venturi tube, a feeding hopper, and a butterfly valv...

Hello everyone! Today, We’d like to introduce a second-stage separation equipment in the solids control system—desander oil and gas.
It is mainly composed of two sets of 10-inch cyclones, inlet manifold, outlet manifold, underflow screen and bracket asse...

The oilfield shear pump is a special pump for solids control drilling fluid additives. The additives used in the mud are high molecular polymers, which have high molecular weight and are difficult to hydrate when directly added. Therefore, pre-shearing of...

What should be paid attention to in the installation and use of shear pump? 1) Installation of shear pump The shear pump and the motor are already installed on the same base when they leave the factory, and the user only needs to install it as a whole on...

What is the difference between the working characteristics of the desilter and the desander? Mud desander (drilling fluid desander) is a secondary solids control device in the drilling fluid solid phase control system, and it is one of the important equip...

Hello everyone! Today, I will introduce this drilling fluid desander and desilter integrated machine behind me, also called mud cleaner, which is one of the main purification equipment in the solid control system. It consists of desander, desilter cones,...

What's the function of a mud shear pump? Shear pump is a special equipment specially used for shearing polymer and clay in drilling fluid. After the polymer (or clay) is fully sheared and mixed in advance, it can enter the drilling fluid system to give f...

Centrifugal sand pump is a special type of centrifugal pump. It is the power source of desander, desilter and slurry mixing device in drilling fluid solids control system equipment. Since the medium of the pump is drilling fluid, and the drilling fluid is...

The safe operation of the sand pump plays a very important role in the solid phase control of the mud. In the solids control system, it serves as the power source and slurry supply pump for the desilter, desander or mud cleaner. At the same time, it also...

The reason why the vacuum degree of the vacuum deaerator is not high or zero: 1. The water in the vacuum pump is not filled or not filled with water 2. The vacuum tank or vacuum pipeline is not well sealed 3. The suction pipe or the discharge pipe mouth d...

In the production process of hydrocyclones , the factors that affect their working efficiency mainly include two aspects: material feeding parameters and overflow and sand discharge methods. If you want to maintain the stable and efficient operation of th...

What are the reasons for the poor chip removal of the petroleum mud shale shaker and what are the elimination methods? Reasons for poor chip removal of petroleum mud vibrating screen: 1. Single motor work 2. The motor turns wrong 3. The screen is not full...

Hello everyone! Today, We’d like to introduce a third-stage separation equipment in the solids control system-drilling fluid desilter.It is mainly composed of 10 groups of 4-inch cyclones, inlet manifolds, outlet manifolds, underflow screens and bracket a...

The cylinder diameter of this mud gas separator is 1.2 meters, and the length is 5 meters. The volume of the tank can reach 6 cubic meters. The designed pressure is 392PSI, while the daily liquid processing capacity can reach 8000 cubic meters and daily g...

What do we need to do when the drilling fluid sand pump is not in use? 1. If the drilling fluid sand pump is not used for a long time, it should be sealed up. 2. Before sealing, it is necessary to carefully remove the dirt, vent all parts of the hydraulic...