WeChat: 86-13735815206 / 86-17392256505
Phone: 86-29-88680837
Mail: sales@hlsolidscontrol.com
Add: Room 804, Building 1, Western Cloud Valley Phase II, Fengxi New Town, Xixian New District, Shaanxi Province
Solids Control Equipment
- What are the functions of drilling fluid
Drilling fluid was previously called mud, which refers to some fluid that can be used in drilling operations. The drilling fluid is pumped from the surface into the drill string, through the drill bit, and then back to the surface via the annulus. Drillin...
- What should be paid attention to in the installation of centrifugal sand pump
What should be paid attention to in the installation of centrifugal sand pump? Centrifugal sand pump is a special type of centrifugal pump. It is the power source of desander, desilter and slurry mixing device in drilling fluid solids control system equip...
- What are the causes of vibration and abnormal noise in the operation of centrifugal pumps? How to so
The drilling fluid centrifugal pump , also called sand pump, is an important equipment in the solid-liquid separation system. Two types of centrifugal pumps, SB8×6×14 and SB8×6×11, are mainly used to provide a certain displacement and pressure to the desa...
- What kinds of sand pump impellers are there
Centrifugal pumps are often considered to be a kind of kinetic energy machine. The rotation of the impeller causes the fluid in the impeller to rotate at a high speed, thereby transferring energy to the liquid. The impeller mainly has the following three...
- What is the reason for the excessive power of the sand pump shaft
The excessive shaft power of the Centrifugal Sand Pump will occur during use, which will affect the efficiency and service life of the sand pump. So what is the...
- What is the general motor power of the mud Shale Shaker
What is the general motor power of the Mud Shale Shaker? Is it better for the Shale Shaker motor to have a higher power? There is a best match for any equipment...
- What is a solids control system
The drilling fluid solid control system is mainly composed of drilling fluid purification equipment, drilling fluid circulation tanks and auxiliary equipment (such as vibrating screen, vacuum degasser , desander, desilter, sand pump, hopper, agitator, dri...
- OWhat are the motions of the Shale Shaker
Summarizing the design history of Mud Shale Shaker, the trend is toward the development of fine mesh screens. The design of the Shale Shaker has been relatively...
- What are the main considerations in Shale Shaker design
The purpose of the Shale Shaker is to divert the drilling fluid, make it pass through the screen surface, retain the solid particles on the screen surface, and...
- What are the main components of the Shale Shaker
The Shale Shaker is mainly composed of a liquid storage tank, a vibration isolation unit, a skid, an overflow, a shaker screen surface, a vibrating frame, and a...
- What is the difference between rubber soft connection and metal soft connection
What is the difference between rubber soft connection and metal soft connection? The two seem to be very similar, but their functions are quite different. Stainless steel metal hose, also known as metal hose, metal soft connection, stainless steel hose, h...
- What‘s the principle of fluid passing through the Shale Shaker
The main purpose of the Shale Shaker is to remove the useless solid phase of the drilling fluid as much as possible without the total amount of waste drilling fluid. To achieve these two projects, the vibrating screen must be required to separate drilling...
- What factors need to be considered when choosing a Shale Shaker?
Through operating experience and engineering design for the well structure, we can plan a number of operating procedures in drilling operations in advance. When drilling operations in any area, drilling engineering designers often hope to obtain definite...
- What problems can drill cuttings in drilling fluid cause
What problems can drill cuttings in drilling fluid cause? In oil and gas drilling, the threads on the drill string cannot take the cuttings out of the wellbore, but use the drilling fluid to take the cuttings out of the ground, but the cuttings left in th...
- Design and feasibility considerations of drilling rigs
Design and feasibility considerations of drilling rigs: What rig to use? What equipment has been installed? Is it installed correctly? What needs to be repaired? Is the tank placement correct? If you want to make corrections, what correction scheme is use...