Solids Control Equipment

What do you need to consider when buying solids control equipment? type and size of solid particles needed to remove ? What type of solid phase cleaning equipment is recommended? Is this kind of solids control equipment feasible? Which manufacturer? Origi...

1. Weighted drilling fluid Because the high solid content affects the performance of the separator, the weighted material is mainly accumulated in the underflow waste, so the hydrocyclone is not commonly used in the weighted drilling fluid. Generally,...

The use of centrifuge in weighted drilling fluid The inevitable high solid content of the aggravated drilling fluid, the decrease in the quality of the filter cake caused by the decrease of the particle size with time, the increase of the static shear for...

In the drilling system, the drilling fluid cleaner is usually placed in the same position as the desilter. Desilter or hydrocyclone is usually used to process unweighted drilling fluid, and the processing of barite or hematite-containing drilling fluid re...

What are the mud cleanersused for? Mud cleaners are used to remove part of the solid phase in expensive non-aggravated drilling fluids, such as potassium chloride drilling fluids. In this case, the solid phase larger than the mesh size is removed by the u...

Oilfield high speed centrifuge is one of the important solids control equipment for separating mud, also known as barite centrifuge and solids control centrifuge....

Mud agitator is a very important solids control equipment. Mixing and mixing devices must be properly designed and installed correctly. Incorrect parameter design and incorrect installation will result in poor equipment performance....

What are the design parameters of the drilling fluid gun?In the process of oil solid phase control, drilling fluid guns are used, so what are the design paramet...

The degasser is an industrial equipment used in oil and gas drilling operations. It is part of the mud system and is used to remove gaseous pollutants from dril...

Ignition, we usually see it in the video or the oil production site that the oil well will erupt, some person may not understand it, so we will talk about why t...

After the liquid enters the impeller, the direction of the liquid flow is changed. The suction port of the impeller and the discharge port are at right angles,...

The mud agitator is a continuous and reliable drilling mud solids control system for the drilling fluid to maintain the uniformity of the drilling fluid and sus...

The function of the desilter is to reduce the load of the downstream desilter. Installing a desilter in front of the desilter can effectively remove a large amo...

The spray pump and the sand pump are both single-stage single-suction centrifugal sand pumps. They have many similarities in structure. Both adopt an axial suct...

Mud solids control equipment is to control the harmful solid particles in the mud. By scientifically arranging solids control equipment, a reasonable and effici...