Shear pump bearings can be lubricated by two methods
Shear pump bearings can be lubricated by two methods:
a. Lubricate with machine oil:Shear pump bearings can be lubricated with No. 30 machine oil. The amount of lubricating oil added should be added to the center line of the oil mark, do not add too much oil, so as not to cause vibration and overheating of the bearing. In addition, it is recommended to replace the machine oil every 90 days or every 1000 hours of operation to keep the bearings in a good lubrication state.
b. Lubricate with grease:In special cases, you can also use oil-compatible grease for bearing lubrication. Grease usually performs better under high temperature or high load conditions, so in some special working conditions, using grease may be a more suitable choice.
Whether you choose to use machine oil or grease, you need to check the lubrication of the shear pump bearings regularly, and replace the oil or grease as needed to ensure that the bearings are always in good working condition. At the same time, it is necessary to formulate an appropriate lubrication plan and cycle according to the usage of the shear pump and the manufacturer's recommendations.
In engineering scenario applications, even for good equipment, regular maintenance and regular use of the equipment are very important. HL petroleum reminds you that scientific maintenance and use methods can very effectively extend the service life of the equipment, improve the efficiency of the equipment, thereby saving money. Costs and expenses.
HL Petroleum is a
solid control equipment manufacturer integrating R&D, production, sales and service. The main products include
Shale Shaker, Desander, Desilter, Centrifugal Pump, mud agitators, poor boy degasser,Mud Pumps,mud tank etc. If necessary, please contact us.
