Mission Pump Parts

Product details

Xi'an HL can supply centrifugal pump parts that can replace Mission pump parts
Mission pump anatomy chart

>>Send an Enquiry sales@hlsolidscontrol.com<<
Mission pump parts list

Item	Description	P/N	Qty	Material
1*	Pump shell	See below table	1	Hard Iron
1A	Seal washer for pump shell	10399-46-1	1	Vellumoid
1B	Tightening nut for pump shell 3/4	3932-61	12	Stl
1C	Tightening nut for pump shell 3/4X85	3862-76	12	Stl
1D	Square head plug 3/8	8505-04-01	1	Stl
1E	Square head plug 1/2	8505-04-01	1	Iron
2*	Impeller	See below table	1	Iron
2A	O-ring 46.2X1.8	19110-72	1	Fluororubber
2B	Lock washer for impeller		1	Stl
2C	Lock wahser for impeller		1	Stl
3*	Mechanical seal box	22223-01-30	1	Hard Iron
3*	Packing seal box	20614-01-30	1	Hard Iron
3A	Tightening nut for mechanical seal box	3861-117	2	Stl
4	Packing pressing bush	20622A	1	Bronze
5	Mechanical seal	22451-1	1	Tungsten Carbide
5A	Packing 12×12	25014-04M-B	3	Kevlar
6	L bolt assembly	B3701A	2	Stl
7	Shaft	20612-02-33	1	AISI 4140
7A	Wear bushing(Mechanical seal)	20943-21	1	AISI E7140
7A	Wear bushung (Packing seal)	20613-21G-7A	1	AISI E7140
7B	Key	4372-5-21	1	416SS
7C	O-ring 51.5X2.65	23444-01-72	1	Fluororubber
8	Water retaining ring	22210-1A	1	Bronze
8A	O-ring 63X2.65		1	Fluororubber
9	Bearing base	20618-12-1	1	Cast Iron
9A
9B
9C	Square head plug 1/2	8505-05	1	Iron
9D	Breathing mouth	8267-01	1	Stl
9E
9F
9G	Detrusion bolt for pump shell	2538-1A	3	Stl
10A	Inside bearing cover	20626	1	Iron
10B	Seal washer for inside bearing cover	20625	1	Vefetable Fiber
10C	Oil seal	20619-01	2	Buna-n
10D	Bolt for inside bearing cover	3861-1	2	Stl
10E	Nut for inside bearing cover	3932-2	2	Stl
10F
10G	Alemite fitting NPT1/8	21641-01	1	Stl
11	Inside bearing NUP313E	N/A	1	Vendor
12	Axial adjustment collar	20624-01-01	1	Iron
12A	O-ring 140X3.55	7496-253	1	Buna-n
12B	Nut for axial adjustment collar	3861-138	4	Stl
12C	Detrusion nut for axial adjustment collar	3932-62	2	Stl
13	Outside bearing	20617-01-01	1	Stl
13A	Alemite fitting NPT1/8		1	Stl
13B	O-ring 120X3.55	7496-26	1	Buna-n
13C	Oil seal 47.6X69.85X9.525	20619-02	1	Buna-n
13D	Bolt for outside bearing cover	3861-139	2	Stl
14	Bearing 7311B/DB	N/A	1	Vendor
14A	Lock wahser	6124-4	1	Stl
14B	Lock nut	6123-4	1	Stl
1*	Pump case,3X2X13	19203-01-30A	1	Hard Iron
1*	Pump case,4X3X13	19205-01-30A	1	Hard Iron
1*	Pump case,5X4X11	19222-01-30A	1	Hard Iron
1*	Pump case,6X5X11	19122-01-30A	1	Hard Iron
1*	Pump case,6X5X14	19123-01-30A	1	Hard Iron
1*	Pump case,8X6X11	19763-01-30A	1	Hard Iron
1*	Pump case,8X6X14	19117-01-30A	1	Hard Iron
1*	Pump case,10X8X14	20937-01-30A	1	Hard Iron
2*	Impeller for pump,3X2X13	19204-XX-30	1	Hard Iron
2*	Impeller for pump,4X3X13	19206-XX-30	1	Hard Iron
2*	Impeller for pump,5X4X11	19224-XX-30	1	Hard Iron
2*	Impeller for pump,6X5X11	19121-XX-30	1	Hard Iron
2*	Impeller for pump,6X5X14	19121-XX-30	1	Hard Iron
2*	Impeller for pump,8X6X11	19121-XX-30	1	Hard Iron
2*	Impeller for pump,8X6X14	19116-XX-30	1	Hard Iron
2*	Impeller for pump,10X8X14	21867-XX-30	1	Hard Iron
xx or A0 - Impeller code - First is equal to the integer of impeller diameter(inch) - 4. Thus 10 =6,9=5,8=4,etc...14 Use alphabet A.
Second X is the magnification of 1/8.Thus 1/8=1,1/4=2,1/2=4,etc...thus a impeller code of 10.5 is 64,impeller code of 12 is 80, impeller code of 13.25 is 92 etc.