This kind of drill cuttings dryer for mud processing, people in the oil field should know that it is used in the field where oil-based mud treatment, so what is the working principle of the cuttings dryer and what is the working process. Today, HL's sales staff will give you a brief introduction of it.
The drill cuttings dryer uses the principle of centrifugal separation to separate the solid and liquid phases of the drill cuttings. According to the customer's requirements for the particle size of the separated particles, the screens with different gaps are selected; the range of the screen gaps: 0.25~0.5mm.
1. Shale Shaker 2. Desander 3 Desilter 4. Centrifuge 5. Screw conveyor 6. Drill cuttings dryer 7. Drill cuttings processed by the drill cuttings dryer 8. Drilling cuttings box 9. Mud supply pump 10. Decanter Centrifuge 11. Mud after treatment 12. Drilling cuttings after centrifuge treatment
The drilling fluid discharged from the wellhead is processed by the vibrating screen 1, desander 2, desilter 3, centrifuge 4, and then conveyed to the spin dryer 6 by the screw conveyor 5 for treatment; the solid part 7 directly after the spin dryer treatment After removal, the recovered drilling fluid enters the mud storage tank 8; the drilling fluid in the mud storage tank is supplied to the centrifuge 10 through the slurry supply pump 9 for further separation. After treatment, the liquid phase part 11 returns to the drilling fluid circulation system, and the solid phase part 12 is directly discharged .
Xi'an HL Petroleum Equipment Company has a mud non-grounding system (water-based mud treatment and oil-based mud treatment), welcome to send inquiry to us: sales@hlsolidscontrol.com if you want to know about the drill cuttings dryer.
