What is the working process of the mud cleaner

What is the working process of the mud cleaner? What is the working principle of the mud cleaner? Today, the editor of HL will give you a brief introduction of the drilling fluid cleaner.

The drilling fluid mud cleaner plays a connecting role in the entire drilling fluid solids control system. The polyurethane cyclone on the drilling fluid mud cleaner classifies the mud treated by the drilling fluid vibrating screen, which is the purification equipment, and plays a second role. It is to provide guarantee for the efficient work of the centrifuge.

In the working process of the drilling fluid mud cleaner, the solid particles of 47~76μm contained in the mud are subjected to cyclone treatment through the desanding cyclone, and the treated mud is stored in a separate mud tank compartment. Then, this part of the mud is purified again by the sludge cyclone to separate the solid particles of 15~47μm in the mud, and finally the treated mud is sent to the centrifuge for fine purification treatment. The mud separated by the de-sanding and de-sludge cyclone is supplemented and sieved through the underflow screen to avoid waste.

During the working process of the drilling fluid mud cleaner, there should also be a desilter for the slurry pump and a desilter for the slurry pump to provide power protection.

What is the working process of the mud cleaner? The above is an introduction to the working process of the drilling fluid cleaner. If you want to know more about the mud cleaner, welcome to send inquiry to us: sales@hlsolidscontrol.com.