What are the daily maintenance of mud cleaner

What are the daily maintenance of mud cleaners? The drilling fluid mud cleaner needs to be used in combination with the desanding supply pump and the desludging supply pump in the working process. At the same time, the appropriate desanding cyclone and desludging cyclone should be selected according to the processing capacity of the complete solids control system. And the bottom flow screen, and then select the matching sand removal and slurry supply pump and mud removal and slurry supply pump. The domestic desander cyclone is usually 10", and the sludge cyclone is usually 4". Polyurethane is recommended for the material, which has a long service life.

1. The cyclone is an important separation and classification equipment for the mud cleaner. Special attention should be paid to the maintenance of the cyclone during use. Sometimes the nozzle is blocked during the use of the cyclone and no slurry is produced. At this time, it should be rotated. Open the drip nozzle cover and simply dredge it, then it can return to normal.

2. When the liquid ejected by the cyclone group is not uniformly umbrella-shaped, the drip nozzle should be properly turned and observed until it returns to the normal state.

3. For the effectiveness and service life of the cyclone, the drip nozzle and other parts should be cleaned and maintained frequently.

4. When the underflow screen does not move according to the prescribed trajectory, it may be that the installation direction is wrong or there is a problem with the motor circuit. You should immediately disconnect the power supply and check the point machine or circuit to ensure that it returns to normal.

5. If the underflow screen is running out of slurry or blocked during work, adjust the angle of the screen box in time and ensure that the selected screen is suitable for the mud to be processed.

6. Frequently observe and inspect the underflow screen. The broken screen should be replaced or repaired in time. The underflow screen and the screen should be cleaned after each shutdown.

7. Regular cleaning and inspection of all parts of the mud cleaner should be carried out to ensure the use effect and service life.

The mud cleaner is not only suitable for mud treatment and solid-liquid mixture treatment in various drilling environments, but also has a compact structure, a small footprint, and powerful functions. It is not only an important equipment for mud processing in drilling platforms, but also mud processing in trenchless projects, which directly affects the production efficiency of oil and gas fields and the safety of normal operation of the project. If you want to know more about the mud cleaner, welcome to send inquiry to us: sales@hlsolidscontrol.com.