Desilter

Product details

Desilter are also known as cyclone desilters, drilling fluid desilters or mud desilter. It is usually used as a three-stage solid control equipment to further treat solid phase particles in drilling fluid to achieve higher solid phase separation effect and better drilling fluid performance.>>Send an Enquiry sales@hlsolidscontrol.com<<

Desilter Features

1. The desilter has a high separation capacity and a wide separation particle size range;

2. The bottom outflow port of the cyclone is shaped like an umbrella-shaped "wet bottom" sand discharge so that the particles in the separation zone can be quickly discharged, reducing the probability of underflow port clogging;

3. Advanced small two The screen mud vibrating screen has large processing capacity, low noise and long screen life;

4. the symmetrical liquid inlet mechanism makes the swirling flow distribution reasonable and stable.>>Send an Enquiry sales@hlsolidscontrol.com<<

Desilter Parameters

Model	HCN100×4S	HCN100×8S	HCN100×10S	HCN100×16S
Capacity	50 m³/h	100 m³/h	160 m³/h	200 m³/h
Cyclone Diameter	100mm(4”)	100mm(4”)	100mm(4”)	100mm(4”)
Cyclone Quantity	4	8	10	16
Separation Particle Size	20～40μm	20～40μm	20～40μm	20～40μm
Motor Power	0.5 KW	0.5 KW	0.5 KW	0.75 KW
Applicable Field	Wells less than 100 meters	Horizontal Directional Drilling	4000m oil drilling	Oil drilling above 5000 meters
Supporting Sand Pump	SB4×3-15KW	SB5×4-22KW	SB8×6-55KW	SB8×6-55KW
Weight	550KG	750KG	800KG	1100KG
Dimension: L×W×H	1500×800×1800 mm	1500×1200×1800 mm	1500×1300×1800 mm	1500×1500×1800 mm