• Solids Control EquipmentMud Shale Shaker Degasser Mud Cleaner Centrifuge Mud Agitator Mud Gun Jet Mud Mixer Centrifugal Pump Shear Pump Spray Pump Vacuum Pump Mud Gas Separator Ignition Drilling Cuttings Dryer Filter Press Conveyor
  • Mud Treatment SystemDrilling Fluid Solids Control System Water-based Mud Treatment System Oil based Mud Treatment System Trenchless Mud Treatment System Mud Mixing System Drilling Fluid Cooling System Truck mounted Mud Circulation System Barite Recovery System
  • Tank and Steel StructureRig Mat Elevated Diesel Tank Nested Water Tank Fracturing Fluid Tank Drilling Pipe Basket Drill Cuttings Box Mud Storage Tank
  • Drilling Tools and Spare PartsMud Shale Shaker Spare Parts Centrifugal Pump Spare Parts Mud Pump Spare Parts Centrifuge Spare Parts Mud Tank Bottom Valve Mud Hopper Mud Tank Level Alarm Polyurethane Cyclone Electric Motor WPS Reducer Mud Tank Union Explosion-proof Water Tank Heater
  • ApplicationOilfield DrillingGas Geothermal DrillingTrenchless HDDDrilling Waste TreatmentSewage TreatmentTunnel ShieldTailings Dry Discharge
  • Contact us
    WhatsApp: 86-13735815206 / 86-17392256505
    WeChat: 86-13735815206 / 86-17392256505
    Phone: 86-29-88680837
    Mail: sales@hlsolidscontrol.com
    Add: Room 804, Building 1, Western Cloud Valley Phase II, Fengxi New Town, Xixian New District, Shaanxi Province

    What is a mud-water balance shield

    Time: 2023-06-15 Source: Solids Control Equipment Author: hlsolidscontrol

    What is the mud-water balance shield method? Nowadays, there are always people around us talking about the shield mud-water balance, so today the editor of HL will tell you about it. In addition, HL also supply mud processing equipment.

    The mud water shield machine uses pressurized mud water or mud (usually bentonite suspension) to stabilize the excavation surface. On the back side of the cutter head of the mechanical shield, there is a sealed partition behind the cutter head to remove water, The muddy water made by mixing clay and its additives is pressed into the muddy water tank through the conveying pipeline. When the muddy water fills the whole muddy water tank and has a certain pressure, a muddy water pressure chamber is formed. After separation, the mud is reused.

    The earth pressure balance shield machine uses soil material (add foam if necessary to improve the soil) as a medium for stabilizing the excavation surface. A soil chamber is formed between the partition behind the cutter head and the excavation surface, and the cutter head rotates for excavation. The soil material is increased, and the soil material is transported out by the rotation of the screw conveyor. The soil pressure in the soil chamber can be adjusted by the excavation speed of the cutter head rotation and the excavation volume (rotation speed) of the screw feeder. Through the pressurization of muddy water and the pressure maintaining mechanism, the stability of the excavation face can be maintained.

    When the shield is advancing, the soil and sand cut by the rotating cutter are stirred by the stirring device to form high-concentration muddy water, which is sent to the ground mud-water separation system by means of fluid transportation, and the ballast soil and water are separated and returned to the mud-water silo. The main characteristics of the pressure-balanced shield method. Because it is the muddy water pressure that makes the excavation surface stable and balanced, it is named muddy water pressurized balanced shield, or muddy water shield for short.
     

    Xi'an HL Petroleum produces mud treatment equipment, welcome to send inquiry to us: sales@hlsolidscontrol.com if you are interested in it.

    Tel: 86-29-88680837
    WhatsApp: 86-13735815206 / 86-17392256505
    WeChat: 86-13735815206 / 86-17392256505
    E-mail: sales@hlsolidscontrol.com
    Add: Room 804, Building 1, Western Cloud Valley Phase II, Fengxi New Town, Xixian New District, Shaanxi Province
    ©2023 Xi'an HL Petroleum Equipment Co., Ltd.