Explanation of model of solid control sand pump SB6×8FJCP-13 (75KW)

SB6×8 F J C P-13(75kW)

SB—means: SB series single-stage single-suction sand pump

6—Indicating: pump outlet diameter (in)

8—Indicating: pump inlet diameter (in)

F-means: Reverse (looking at the pump inlet, the pump rotates counterclockwise, and the pump outlet is located on the right side of the vertical center line of the pump inlet)

Z-means: forward rotation (looking at the pump inlet, the pump rotates clockwise, and the pump outlet is on the left side of the vertical centerline of the pump inlet)

J-means: mechanical seal

P—means: belt drive

C—means: American standard import and export flange

13 (75KW)-means: the nominal diameter of the impeller (in), the matching power is in the brackets.

Note: 1. When the rotation code is not indicated: SB6×8 metric pump default rotation direction: forward rotation; other specifications pump default rotation direction: reverse.

2. When the inlet and outlet flange codes are not indicated, the inlet and outlet flanges of the pump adopt metric standard flanges by default.

3. When the transmission code is not indicated, the pump adopts the direct drive mode by default.

4. The inlet diameter of the inch model is at the front and the outlet diameter is at the back.

Xi'an HL produces various oilfield sand pump, shear pump, spray pump, and various models are available, welcome to send inquiry to us: sales@hlsolidscontrol.com.