• Solids Control EquipmentMud Shale Shaker Degasser Mud Cleaner Centrifuge Mud Agitator Mud Gun Jet Mud Mixer Centrifugal Pump Shear Pump Spray Pump Vacuum Pump Mud Gas Separator Ignition Drilling Cuttings Dryer Filter Press Conveyor
  • Mud Treatment SystemDrilling Fluid Solids Control System Water-based Mud Treatment System Oil based Mud Treatment System Trenchless Mud Treatment System Mud Mixing System Drilling Fluid Cooling System Truck mounted Mud Circulation System Barite Recovery System
  • Tank and Steel StructureRig Mat Elevated Diesel Tank Nested Water Tank Fracturing Fluid Tank Drilling Pipe Basket Drill Cuttings Box Mud Storage Tank
  • Drilling Tools and Spare PartsMud Shale Shaker Spare Parts Centrifugal Pump Spare Parts Mud Pump Spare Parts Centrifuge Spare Parts Mud Tank Bottom Valve Mud Hopper Mud Tank Level Alarm Polyurethane Cyclone Electric Motor WPS Reducer Mud Tank Union Explosion-proof Water Tank Heater
  • ApplicationOilfield DrillingGas Geothermal DrillingTrenchless HDDDrilling Waste TreatmentSewage TreatmentTunnel ShieldTailings Dry Discharge
  • Contact us
    WhatsApp: 86-13735815206 / 86-17392256505
    WeChat: 86-13735815206 / 86-17392256505
    Phone: 86-29-88680837
    Mail: sales@hlsolidscontrol.com
    Add: Room 804, Building 1, Western Cloud Valley Phase II, Fengxi New Town, Xixian New District, Shaanxi Province

    What is the advantage of submerged pump

    Time: 2023-06-03 Source: Solids Control Equipment Author: hlsolidscontrol

    The submerged slurry pump is used in the oil drilling mud solids control system to pump concentrated liquid, heavy oil, oil residue, turbid liquid, mud, and fluid containing mud sand residue and corrosive liquid.

    The submerged slurry pump has significant advantages such as high efficiency, maintenance-free, high temperature resistance, and long service life.

    The submerged slurry pump is a vertical single-stage single-suction cantilever centrifugal pump structure.

    The impeller is a semi-open impeller, and a stirring impeller is provided at the extension of the suction side of the impeller.

    The vertical motor is installed on the motor base and connected to the pump with a coupling.

    The pump shaft in the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump body, and no shaft seal is used, which can transport the medium containing a large concentration of solid particles.

    The length of the pump inserted into the liquid is between 800mm and 2500mm, and a suction pipe can be equipped if necessary.
    submerged slurry pump

    The main feature of the submerged slurry pump is that the pump shaft in the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump casing, and no shaft seal is used. It can transport the medium containing a large concentration of solid particles; maintenance-free, High temperature resistance. The length of the pump inserted into the liquid is between 800-1900mm, and a suction pipe can be equipped if necessary. The transmission is installed on the motor base by a vertical motor and connected with the pump by a coupling. Viewed from the direction of the motor, the pump rotates in a clockwise direction.

    The flow parts of this series of pumps are made of high-hard alloy castings, and their materials have high abrasion resistance, corrosion resistance, and impact resistance, which can increase their life. In addition, this series of pumps uses dynamic pressure reduction to ensure that the slurry is not easy to leak .

    If you want to buy submerged slurry pump, welcome to send us inquiry: sales@hlsolidscontrol.com

    Tel: 86-29-88680837
    WhatsApp: 86-13735815206 / 86-17392256505
    WeChat: 86-13735815206 / 86-17392256505
    E-mail: sales@hlsolidscontrol.com
    Add: Room 804, Building 1, Western Cloud Valley Phase II, Fengxi New Town, Xixian New District, Shaanxi Province
    ©2023 Xi'an HL Petroleum Equipment Co., Ltd.