What are the components of a mud agitator

Mud agitator accessories include motors, reducers, bases, stirring rods, impellers and other spare parts. Among them, the motor and reducer, reducer and impeller shaft are connected by rigid couplings, and the impeller is assembled by welding four blades. Mud agitators are generally installed on the surface of the mixing tank, and the stirring medium is mainly solid and liquid, including mud, mud water, oil and water.

In the actual use of mud agitators, failures or damage often occur due to the quality of parts such as motors, reducers, bases, stirring rods, impellers, etc. Therefore, the quality of mud agitator parts directly determines the use effect and life of the agitator. Agitator. When we choose a mud agitator, we need to understand the daily maintenance and troubleshooting methods of mud agitator spare parts.

The faults caused by mud agitator parts include drive failure, transmission failure and mechanical failure. Failure of explosion-proof motor parts of mud agitators will cause drive failures in which the motor cannot rotate. Failure of reducer spare parts will cause the motor torque to be unable to be transmitted to the stirring rod through the reducer, resulting in transmission failure. If the maintenance is not done properly, such as the reducer is not lubricated frequently, it is indeed easy to fail; the impeller of the mixer, the material of the extension rod spare parts or the improper installation may cause other mechanical failures. Therefore, the two important parts of the motor and the reducer need special maintenance during the use of the mixer.