How to deal with the oil leakage of the mud agitator?

Causes and solutions for mud agitator oil spill problems
1. Worn oil seal lip: If the oil seal lip of the mud agitator is worn and causes oil leakage, the best way is to replace the damaged oil seal with a new one. Make sure to choose the appropriate oil seal model and specification, and follow the correct installation steps.
2. Too much oil: Too much lubricating oil may cause oil spillage. Check the oil mark or the manual of the lubrication system, and adjust the lubricating oil to the correct oil level according to the indicated points.
  
3. Oil drain plug not tightened tightly: If the oil drain plug is not tightened tightly, it may cause oil leakage from the plug. Make sure the oil drain plug is properly tightened and if necessary use suitable sealing tape to prevent leaks.
4. Damaged oil level: If the oil level of the mud agitator is damaged, it may affect the correct oil level detection. Replace damaged oil dipsticks to ensure accurate monitoring of lubricating oil levels.

The above measures can effectively solve the problem of mud agitator oil leakage, ensure the normal operation of the equipment and reduce the risk of environmental pollution. However, if the problem persists or other serious failures occur, it is recommended to seek professional repair and technical support in time.

HL Petroleum is a professional solids control equipment manufacturing company.it have more than 20 years of research, design and manufacturing experience.Its products are widely used in oil drilling, solid-liquid separation, mud purification and other fields.The main products include Shale Shakers, Mud Cleaner, Vacuum Degasser, Desander, Desilter, Centrifugal Pump, Decanting Centrifuge,mud agitators, poor boy degasser, Mud Gun,Mud Pumps,mud tank etc. If necessary, please contact us.