How to install the mud shale shaker？

Installing a mud shale shaker is an important step that needs to be done properly to ensure the safe and proper operation of the equipment. The following are the installation steps of the shale shaker:

1. Preparation:
A. Ensure proper lifting equipment and spreaders are available to ensure that the equipment can be lifted and placed safely.
B. It is strictly forbidden to lift the equipment at positions other than the designated lifting points to avoid equipment damage or personal injury.

2. Check the countertop:
C. Confirm that the platform on which the mud shale shaker is installed is solid and capable of bearing sufficient weight. The stability of the countertop is critical to the proper functioning of the equipment.

3. Place the device:
D. Place the device on the table and make sure it is stable. If the equipment is not stable, it may cause uneven vibration of the equipment and affect the screening effect.

4. Fixed equipment:
E. Make sure that the device is reliably fixed on the table to prevent the device from shaking or moving during use. Fixing the device may be accomplished by bolts, nuts or other suitable means.

5. Connect the power supply:
F. Connect the mud shale shaker to an appropriate power source to ensure proper operation of the equipment.

6. Check the device:
G. Before use, conduct a comprehensive inspection of the equipment to ensure that all parts are installed correctly, the bolts are tight, and there is nothing loose or missing.

7. Safety precautions:
H. When using the mud shale shaker, the operator should pay attention to the safety operation rules of the equipment and avoid touching the moving parts when the equipment is running to prevent accidents.