HL Petroleum’s new horizontal sand pump has completed production and will be put into use soon

Compared with ordinary pumps, Xian Henglian horizontal sand pump (also known as drilling fluid centrifugal pump) is heavy and durable. Because of its special strength, the wall thickness is thicker than that of ordinary pumps, and the service life is longer. Relatively long. The pump is of centrifugal design, and the axial clearance between the impeller and the pump body is the same. The pump can pump streamlined liquids and even cut off the flow. The pump body has an annular flow channel, which can eliminate eddy current and cavitation, and can also reduce the radial load of the bearing. Since the inlet pipe diameter of the pump is reasonable, the suction pressure must be low. The seal of the pump body adopts a groove structure to prevent liquid flow from leaving the impeller.

A batch of new horizontal sand pumps have been completed and will be put into use soon

The drilling fluid centrifugal pump is an important equipment in the solid-liquid separation system.

Two types of drilling fluid sand pumps, SB8×6×14 and SB8×6×11, are mainly used to provide a certain amount of displacement and pressure for the desander, desilter, mixing pump, and mud pump.

Two types of drilling fluid sand pumps, SB6×5×14 and SB6×5×11, are mainly used for truck mounted drilling rigs.

The SB4×3×13 drilling fluid sand pump is mainly used in conjunction with the supply tank, also known as the supply pump.

SB3×2×13 drilling fluid sand pump is mainly used in conjunction with water tank or water cooling system, also known as clean water pump.

HL Petroleum is a professional solids control equipment manufacturer.If you are interested in our equipment,please contact us.