How to effectively deal with the corrosion of drilling fluid tanks

Mud tank is an important facility in the process of oil drilling, and it contains highly corrosive drilling fluids. A little carelessness will cause the leakage and penetration of corrosive liquids and cause environmental pollution. At present, the anti-corrosion treatment of mud tanks is relatively simple, and leakage often occurs, which causes some unnecessary economic losses for customers. Therefore, the anti-corrosion technology of mud tanks is becoming more and more important.

The anti-corrosion treatment of the mud tank is as follows:

1. The surface treatment of mud tanks is mainly divided into three types: oil removal, mud removal, and rust removal.

2. There are three steps in the surface treatment of the mud tank:

2.1 The sludge on the surface should be washed off first;

2.2 Degreasing and removal methods are mainly composed of: solvent method, lye saponification method and emulsification method

2.3 Derusting methods are mainly divided into manual derusting, sandblasting and chemical derusting.

3. In terms of construction safety, all construction personnel must have operational qualifications, and the construction site must be well ventilated.

The mud circulation tank of Xi'an HL Petroleum adopts a corrugated board structure and the standard of "five-level purification, full-process control, and full-explosion-proof circuit", which is well received by the well team, welcome to send inquiry to us: sales@hlsolidscontrol.com if you have any purchase request of it.