How to operate the mud shale shaker?

To operate the mud shale shaker, you need to follow the correct steps and precautions to ensure the safe operation of the equipment and improve the screening efficiency. The following is the operation guide of the mud shale shaker:

1. Preparation before starting up:
A. Before turning on the machine, confirm that the screen box fixing block has been removed and fixed in reverse. This is to prevent the screen box from loosening or falling off during vibration.

2. Pay attention to safety:
B. During the operation of the equipment, it is strictly forbidden to touch the screen box and spring. The vibrating screen in operation will generate a large vibration force, touching the screen box or spring may cause accidental injury.

3. Abnormal situation handling:
C. After starting up, if there is abnormal noise or vibration, stop the machine immediately. Find the cause and troubleshoot. Possible causes include loose sieve, foreign matter stuck on the sieve surface or equipment imbalance. Make sure to restart the device after troubleshooting.

4. Shutdown operation:
D. After shutting down, please cut off the main power supply to prevent unnecessary accidents. Make sure that the equipment has come to a complete stop before disconnecting the power supply.

5. Regular maintenance:
E. Regularly maintain the mud shale shaker, clean the equipment, check the fastening of the bolts, and ensure that the equipment maintains a good working condition during long-term use.

6. Reasonable operation:
F. During operation, avoid overload operation and frequent start and stop, and maintain a stable working state to prolong the service life of the equipment.

7. Operator training:
G. Make sure that the operators have been trained and understand the operating procedures and precautions of the equipment to ensure safe operation and normal operation of the equipment.