What is the composition of the oil drilling fluid desander

HCS  desander is mainly composed of Mud Shale Shaker, bracket, electric control box, pressure gauge, manifold, cyclone, etc.

Working process: The pump transports the sand-water mixture to the cyclone, and the fine sand concentrated by centrifugal classification is supplied to the vibrating screen through the grit chamber of the cleaning tank, when the liquid level of the cleaning tank is too high, it will be discharged through the discharge port. The weight concentration of the recovered material from the linear vibrating screen is 70%-85%. The fineness modulus can be adjusted by changing the pump speed,

Try changing the mortar, adjusting the overflow water, and replacing the sand nozzle. So as to complete the three functions of cleaning, dehydration and classification.

The cyclone of the desander is composed of three parts: a volute, a cone, and a cone. There are mainly two materials, one is high wear-resistant polyurethane material, which has the advantage of wear resistance, and the service life can be as long as 4200 hours. The flow effect is relatively good, but it is not resistant to high temperature.

The other is high-chromium cast iron material. The high-chromium cast iron material is composed of stainless steel feed port, discharge port, conical ceramic cyclone, conical stainless steel tank, automatic or manual sand discharge valve, backflush water valve, etc. The advantages are economical and affordable, high temperature resistance, the disadvantages are not wear-resistant, short service life, generally need to be replaced once in 2000 hours

Xi'an HL Petroleum Equipment Co., Ltd. can produce and provide Derrick desander and desilter cyclones and accessories with reasonable price and faelivery, welcome to send inquiry to us: sales@hlsolidscontrol.com if you want to know more about it.