Why does the drilling fluid Shale Shaker run out of slurry

Why does the drilling fluid shale shaker run of slurry? There are several reasons for the drilling fluid shaker. Today, the editor of Xi'an HL will give you a brief introduction, hoping to help customers who encounter such problems.

However, we must be aware that the drilling fluid shaker may run out of slurry. Sometimes it may be caused by one reason, and sometimes it may be caused by several reasons. We need to investigate one by one.

There are several reasons for the running of the drilling fluid vibrating screen:

1. Reasons for screening materials: high solid content in the drilling fluid, high mud viscosity, dispersion of drill cuttings and other factors related to the materials being screened

2. The reason for the screening machine: the high solid content in the drilling fluid, the high viscosity of the mud, the dispersion of drill cuttings and other factors related to the material being screened

3. On-site installation problem: the direction and position of the fluid inlet of the drilling fluid shaker are not installed properly.

Why does the drilling fluid Shale Shaker run slurry? The above three points are the main reasons for the drilling fluid vibrating screen run slurry. If the customer who uses the Shale Shaker encounters this kind of problem, you can find these reasons first. You may say that the cause of the drilling fluid shaker has been found, how to solve it, we will share in the next issue.