What are the disassembly steps of drilling fluid SB sand pump

Drilling fluid sand pump is an ideal supporting equipment to provide power for desander, desilter, and jet mixing device. It can also be used as a filling pump for auxiliary grouting of mud pump and a replenishment pump for wellheads. Most parts can be interchanged, which has the advantages of convenient operation and maintenance, less leakage of shaft seal, reliable operation and long service life, etc.

Wrong installation and disassembly will affect the service life of the sand pump, so what should be paid attention to during the disassembly process of the sand pump?

(1) Remove the coupling and pressure plate assembly

(2) Remove the pump casing, remove the impeller, and remove the shaft seal parts

(3) Mechanically sealed sand pump, remove the mechanically sealed moving ring, composite sealed sand pump, and exit the auxiliary impeller.

(4) Withdraw the seals from the sealed cavity.

(5) Take out the mud throwing ring, etc.

(6) Exit the shaft sleeve and remove the two bearing glands

(7) Remove the shrink nut and lock washer or snap ring

(8) Remove the shaft or bearing parts from the pump base.

Xi'an HL Petroleum produces various types of sand pump, the SB6x8 series and SB8x6 series are the most common, and can also be customized according to customer requirements, welcome to send inquiry to us: sales@hlsolidscontrol.com if you have purchase request of these equipment.