What are the factors that affect the working efficiency of the cyclone

In the production process of hydrocyclone, the factors affecting its working efficiency mainly include material feeding parameters, overflow and sand discharge methods. If you want to maintain the stable operation of the equipment, you need to be familiar with the reasonable operation skills of the two aspects of operating the hydrocyclone. In daily production, keeping the operating parameters of each process within a reasonable range can ensure the stable operation of the hydrocyclone.

Factors affecting the working efficiency of the cyclone:

1. The feeding pressure of the equipment and the concentration and particle size composition of the material.

The ore feeding pressure set by the equipment mainly affects the processing capacity and classification granularity of the hydrocyclone. When the feeding pressure increases, the slurry flow rate is fast, the influence of viscosity is reduced, and the classification effect of the hydrocyclone is reduced.

be optimized. When dealing with coarse-grained materials, most plants use a low pressure of 49-98KPa, while when dealing with fine-grained and muddy materials, a high pressure of 98-294KPa is used.

The concentration and particle size composition of the feeding material will directly affect the concentration and particle size of the product. The particle size of the overflow product is coarser.

2. The discharge method of overflow and grit.

The ideal working state of the hydrocyclone is that the material should be ejected from the sand in an umbrella shape, and the angle of the umbrella surface should not be too large, so that it can be spread out just right. When the hydrocyclone is used for concentration

When the sand is discharged in a rope shape, the concentration is higher; when the hydrocyclone is used for dewatering operations, the sand is discharged in a larger umbrella shape, and the solid content of the overflow is reduced.

The above are the two factors that affect the working efficiency of the hydrocyclone. However, it is worth noting that the hydrocyclone is affected by many aspects in the production. When the working efficiency of the equipment decreases, we should conduct a specific analysis according to the specific situation. Only by considering the overall situation and working closely together can we obtain the ideal working efficiency. If you encounter problems that are difficult to solve in the use of the equipment, welcome to send inquiry to us: sales@hlsolidscontrol.com and we will design a reasonable solution for you!