What are the reasons for the failure of mud pump accessories

What are the reasons for the failure of mud pump accessories? Today, the editor of HL will introduce you to the problem of mud pump accessories.

1. Several reasons for the heating of the bearings of the mud pump accessories:

① The cold water or cooling water tank is not opened or blocked, and the cooling water or cooling water should have a clearing function.

②The amount of lubricating oil should be adjusted for equipment with poor lubrication.

③There are impurities in the dirty lubricating oil, the bearings should be cleaned and the oil should be replaced.

④ The direction is wrong. Regarding the inlet pressure of the wear-resistant mud pump, please adjust the direction of the thrust bearing.

⑤The socket plug with bearing causes the hot bearing in the cabinet to be unable to discharge, so the equipment becomes hot, and the air outlet should be clean

2.What is the reason for the violent knocking sound of the cylinder liner?

①The piston nut is loose

②The cylinder liner gland is loose

③ Poor inhalation, water hammer

3. What are the reasons for the abnormal noise at the power end, bearing, crosshead, etc.:

①The crosshead guide plate has been severely worn

②Bearing wear

③The guide plate is loose

④There is water hammer at the liquid end

The above are the common failures of several mud pump accessories. We can solve the problem well if we find the problem. Xi'an HL Petroleum provides mud pump accessories, welcome to send inquiry to us: sales@hlsolidscontrol.com if you want to know about mud pump parts.