Mission Centrifugal Pump

Product details

Mission Centrifugal Pump is a special type of centrifugal pump. It is the power source of desander, desilter and slurry mixing device in drilling fluid solids control equipment.

Advantages of Mission Centrifugal Pump

1. 300m3 large flow capacity

2. The wear-resistant and corrosion-resistant material of the wetted parts

3. Mechanical seal, the service life is extended by 6 times

4. Both metric and imperial interfaces meet the needs of domestic and foreign users

5. 6 series, 24 specifications, suitable for different industries

Mission Centrifugal Pump parameters

Model	Capacity (m3/h)	Head (m)	Efficiency (%)	NPSH (m)	Power (KW)
Model	Capacity (m3/h)	Head (m)	Efficiency (%)	NPSH (m)	Shaft power	Motor power
SB8×6-14	320	40	65	4.0	53.63	75
SB8×6-13	290	33	64	4.5	40.7	55
SB8×6-12	270	28	64	4.5	32	45
SB8×6-14I	200	40	62	3.2	35.1	55
SB8×6-13I	180	34	60	3.0	27.8	45
SB8×6-12I	160	30	60	3.0	22	30
SB6×5-14	200	40	62	3.2	35.1	55
SB6×5-13	180	34	60	3.0	27.8	45
SB6×5-12	160	30	60	3.0	22	37
SB6×5-11	200	21	62	2.5	18.5	30
SB6×5-9	160	12	58	3.0	9.02	15
SB5×4-14	120	45	56	4.6	23.3	37
SB5×4-13	90	40	56	4.5	17.5	30
SB5×4-12	90	30	56	4.5	13.1	22
SB5×4-11	90	24	56	4.5	10.5	18.5
SB5×4-10	85	20	56	4.2	8.4	15
SB5×4-9	80	19.5	54	4.5	7.9	15
SB4×3-13	50	40	48	4.5	11.3	18.5
SB4×3-12	45	30	47	4	7.8	15
SB4×3-11	45	24	46	4	6.4	11
SB3×2-13	25	35	40	3	5.9	11
SB3×2-12	23	29	39	3	5.1	7.5
SB3×2-11	20	23	39	3	3.2	5.5

Mission Centrifugal Pump Pictures

mission centrifugal pump

HL Petroleum offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.

Structure Drawing and Parts List

Centrifugal sand pump structure drawing

New image code	Numbers	Name
1	1	Housing
1B	2	Gasket, housing
1A	12	Stud, housing
1C	12	Nut, housing
2	1	Impeller
3	1	Stuffing box-mechanical seal
M3A	1	Mechanical seal assembly
M3B	1	Back-Up packing
4	1	Shaft sleeve
4A	1	Seal, shaft sleeve
5	1	Packing gland
6	2	Gland bolt assembly
7	1	Deflector
8	1	Pedestal
9	1	Cover, inboard bearing
9A	1	Seal, inboard bearing exclusion
9B	1	Seal, inboard bearing cover
9C	1	Within the bearing cap seals
10	1	Bearing inboard
11	1	Shaft
11A	1	Key, shaft
11B	1	Impeller nut
12	1	Housing, outboard bearing
12A	1	Seal, outboard bearing housing
12D	2	Bolt, adjustment, outboard brng. HSG.
12C	2	Outer bearing fastening bolts
13	2	Bearing, outboard
14	1	Nut, bearing
14A	1	Lock washer, bearing nut
15	1	Cover, outboard bearing
15A	1	Seal, shaft, outboard bearing cover
15B	1	Seal, outboard bearing cover
8A	1	Breather
16	1	Oil drain plug
17	1	Coupling
17A	10	Coupling Pin